Self-priming centrifugal pump in AISI 304 steel with Venturi unit suitable for residential applications.
Self-priming centrifugal pump in AISI 304 steel with a special hydraulic system including a Venturi unit (ejector and diffuser) that can suck water up to 8 metres deep.
Suitable for residential applications: gardening and irrigation.
Lightweight and easily transportable, small in size.
For further technical information see the Databook
• Domestic pressurisation
• Pressure boosting in general
• Garden irrigation systems
• Vehicle washing
• Handling of clean water
Flow rate |
From 0.3 to 4.5 m³/h |
Total head |
From 11.5 to 49 m |
Max. working pressure |
6 bar |
Max. temperature of the liquid |
45°C |
Max. suction depth |
8 m |
Poles |
2 |
Insulation class |
F |
Protection degree |
IP44 (IP55 on request) |
Voltage |
Single-phase 1~230V ±10% Three-phase 3~230/400V ±10% |
Pump body |
Stainless steel AISI 304 (EN 1.4301) |
Impeller |
Stainless steel AISI 304 (EN 1.4301) for JE PPO reinforced with glass fibres for JES |
Shaft |
Stainless steel AISI 303 (EN 1.4305) (part in contact with liquid) |
Mechanical seal |
Ceramic/Carbon/NBR (standard) |
Motor support |
Stainless steel AISI 304 (EN 1.4301) |
Commercial documentation3D drawings |
Technical documentation |
Click on the logos to download the certificates
|
Surface Catalogue 50Hz
JES-JE 50Hz
Data Book JE 50Hz 2 poles
Generic instruction manual
Self priming pumps instruction manual