The SP1.0 filter cartridges are efficient filter-separator elements, the molded fiberglass tube is constructed of graded glass fibers, compressed to the proper density and bonded with inert phenolic binders;
The fiberglass tube is supported by a heavy-duty, spiral locked center core for superior resistance to collapse which caused by high differential pressure, the center core can withstand over 75 PSI differential pressure;
The metal end caps are mechanically attached to the center core for structural strength, the fiberglass media is attached to the end caps with a highly resistant adhesive to prevent any possibility of bypass;
Buna N gaskets are attached to the end caps with a polyurethane adhesive and go through a special heat treatment, using an adhesive that is resistant to all hydrocarbons.
The SP1.0 filter cartridge will remove particles down to one micron without excessive differential pressure build-up. A cotton outer wrap protects the fiberglass from dirt and damage during shipment and protects the operator during element change-out.
Brother Filtration SP1.0 filter cartridge can be used in Ethylene processing, fuel gas & instrument gas filtration, inlet gas separation, desiccant hydration, dust extraction and oil mist processing.